Hot Mounting Presses (Hot Pressing Models)
Motorized Press Model P-4001
A power hydraulic press enables specimen mounting to be performed simply by push-button operations. A gas venting process is incorporated to prevent specimen cracking and scattering.
■Product Specifications
| Power Supply | 1-phase 100/110V 50/60Hz |
|---|---|
| Mold Size | Φ25 or Φ32 or Φ38 or Φ40(mm) |
| Heater | 1-phase 110V 400W |
| Temperature Control | Digital setting indicator |
| Standard Mounting Time | 7 to 10 minutes(Digital setting) |
| Power Consumption | Motor 550W (800VA at 60Hz) Heater 400W Control 55VA |
| Outer Dimensions(mm) | 570W×460D×570H |
| Paint Color | N401 |
| Weight | Approx. 85kg |
■Standard Accessories (provided in all models)
| ・Gloves | 1 pair |
|---|---|
| ・Funnel, spoon, flat-blade screwdriver | 1 each |
| ・Silicon spray | 1 can |
| ・Phenolic resin black (700g) | 1 can |
■Remarks
| ※ | Please designate the mold size from among the four standard types. |
|---|---|
| ※ | In case of exchange to a mold of different size, please inquire because there may be parts in common and parts that differ. |
| ※ | The mold sizes are slightly smaller than inch sizes in consideration of the holder setting of the specimen polisher. |
| ※ | Approximately 40 specimens of 32φ×25t(mm) size can be mounted with 1kg of the phenolic resin. |
| ※ | See the page on mounting consumables and coolers in regard to the mounting resins and coolers. |
